On going

# Conflicts:
#	src/pytevolve.py

src/climate.json

@@ -0,0 +1,22 @@
+{
+    "dev": {
+    "ids": ["ea334450945afc"],
+    "name": "atc smart controller",
+    "mf": "Tevolve"
+  },
+
+  "uniq_id": "",
+  "name": "{name}",
+  "state_topic": "homeassistant/climate/{uid}/state",
+  "modes": ["heat", "off"],
+  "mode_command_topic": "{uid}/heater/setmode",
+  "mode_state_topic": "{uid}/heater/currentmode",
+  "min_temp": 7,
+  "max_temp": 30,
+  "temp_step": 0.5,
+  "current_temperature_topic": "{uid}/heater/currenttemp",
+  "temperature_command_topic": "{uid}/heater/settemp",
+  "temperature_state_topic": "{uid}/heater/currentsettemp",
+  "action_topic": "{uid}/heater/idleaction",
+  "availability_topic": "{uid}/availablity/state"
+}

src/device.json

@@ -0,0 +1,12 @@
+{
+  "dev": {
+    "ids": ["ea334450945afc"],
+    "name": "atc smart controller",
+    "mf": "Tevolve"
+  },
+  "o": {
+    "name":"tevolve2mqtt"
+  },
+
+  "qos": 2
+}

src/main.py

@@ -1,238 +1,41 @@
-import time
 from pytevolve import Tevolve
-import paho.mqtt.client as mqtt
+from mqtt_manager import MqttManager
 import threading
-import json
 
-broker_address = "192.168.0.100"
-
-
-def on_disconnect(client, userdata, rc):
-
-    client.connect(broker_address)
-
-
-def on_connect(client, userdata, flags, rc):
-
-    try:
-
-        # client.username_pw_set("admin", "bK2F2ZPjyyngmsN6R32s")
-        #       client.username_pw_set(username="admin", password ="bK2F2ZPjyyngmsN6R32s")
-        client.connect(broker_address)
-    except:
-
-        time.sleep(10)
-
-        client.connect(client)
-
-
-def on_message(client, userdata, message):
-    new_topic = str(message.topic)
-
-    if new_topic == "hallway/heater/settemp":
-        tevolve.set_temperature("3", str(message.payload.decode("utf-8")))
-        # Assume set temp success (Prevent debounce)
-        client.publish("hallway/heater/currentsettemp", payload=str(message.payload.decode("utf-8")), qos=0, retain=False)
-
-    if new_topic == "hallway/heater/setmode":
-        if str(message.payload.decode("utf-8")) == "heat":
-            mode = "manual"
-            # client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
-            client.publish("hallway/heater/currentmode", payload="heat", qos=0, retain=False)
-        else:
-            mode = "off"
-            client.publish("hallway/heater/currentmode", payload="off", qos=0, retain=False)
-            client.publish("hallway/heater/idleaction", payload="off", qos=0, retain=False)
+host = "192.168.0.100"
 
 
 
-        if mode == "manual":
-            if float(Tevolve.hallway_current_temp) > float(Tevolve.hallway_set_temp):
-                client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
-            else:
-                client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
+if __name__ == "__main__":
 
 
-        Tevolve.setmode = mode
-        tevolve.set_mode("3")
-
-
-    if new_topic == "livingroom/heater/settemp":
-       tevolve.set_temperature("2", str(message.payload.decode("utf-8")))
-       # Assume set temp success (Prevent debounce)
-       client.publish("livingroom/heater/currentsettemp", payload=str(message.payload.decode("utf-8")), qos=0,
-                      retain=False)
-
-    if new_topic == "livingroom/heater/setmode":
-        # print(str(message.payload.decode("utf-8")))
-
-        if str(message.payload.decode("utf-8")) == "heat":
-            mode = "manual"
-            client.publish("livingroom/heater/idleaction", payload="heating", qos=0, retain=False)
-            client.publish("livingroom/heater/currentmode", payload="heat", qos=0, retain=False)
-        else:
-            mode = "off"
-            client.publish("livingroom/heater/currentmode", payload="off", qos=0, retain=False)
-            client.publish("livingroom/heater/idleaction", payload="off", qos=0, retain=False)
-
-
-        if mode == "manual":
-            if float(Tevolve.livingroom_current_temp) > float(Tevolve.livingroom_set_temp):
-                client.publish("livingroom/heater/idleaction", payload="idle", qos=0, retain=False)
-            else:
-                client.publish("livingroom/heater/idleaction", payload="heating", qos=0, retain=False)
-
-        Tevolve.setmode = mode
-        tevolve.set_mode("2")
-
-
-
-
-if __name__ == '__main__':
-
     tevolve = Tevolve()
+    tevolve.get_token()
+    tevolve.get_dev()
+    tevolve.get_devices()
 
-    tevolve.post_websocket()
-    time.sleep(1)
+    status = tevolve.get_status()
 
+    mqtt_manager = MqttManager()
 
-    t = threading.Thread(target=tevolve.create_websocket, daemon=True, args=())
-    t.start()
-
-    client = mqtt.Client("ryan-heating")
-
-    #   client.username_pw_set("admin", "bK2F2ZPjyyngmsN6R32s")
-
-    client.connect(broker_address)
-    client.on_message = on_message
-    client.on_disconnect = on_disconnect
-    client.loop_start()
-
-
-    client.subscribe("hallway/heater/settemp")
-    client.subscribe("hallway/heater/setmode")
-
-    client.subscribe("livingroom/heater/settemp")
-    client.subscribe("livingroom/heater/setmode")
+    # threading.Thread(target=mqtt_manager.start_mqtt, args=(host,)).start()
 
 
 
-    livingroom_status = tevolve.get_status("2")
-    hallway_status = tevolve.get_status("3")
+    while 1:
+        if mqtt_manager.is_connected == True:
 
+            mqtt_manager.publish_discovery(tevolve.devices)
 
-    Tevolve.hallway_active = hallway_status["active"]
-    Tevolve.hallway_mode = hallway_status["mode"]
-    Tevolve.hallway_set_temp = hallway_status["stemp"]
-    Tevolve.hallway_current_temp = hallway_status["mtemp"]
+            mqtt_manager.publish_heaters(status)
+            break
 
-
-    # Tevolve.livingroom_active = livingroom_status["active"]
-    # Tevolve.livingroom_mode = livingroom_status["mode"]
-    # Tevolve.livingroom_set_temp = livingroom_status["stemp"]
-    # Tevolve.livingroom_current_temp = livingroom_status["mtemp"]
-
-
-    if Tevolve.livingroom_mode == "manual":
-        Tevolve.livingroom_mode = "heat"
-    if Tevolve.hallway_mode == "manual":
-        Tevolve.hallway_mode = "heat"
-
-    client.publish("hallway/heater/currenttemp", payload=Tevolve.hallway_current_temp, qos=0, retain=False)
-    client.publish("livingroom/heater/currenttemp", payload=Tevolve.livingroom_current_temp, qos=0, retain=False)
-
-    client.publish("hallway/heater/currentmode", payload=Tevolve.hallway_mode, qos=0, retain=False)
-    client.publish("livingroom/heater/currentmode", payload=Tevolve.livingroom_mode, qos=0, retain=False)
-
-    client.publish("hallway/heater/currentsettemp", payload=Tevolve.hallway_set_temp, qos=0, retain=False)
-    client.publish("livingroom/heater/currentsettemp", payload=Tevolve.livingroom_set_temp, qos=0, retain=False)
-
-    # Setup initial hallway heater values
-    if Tevolve.hallway_mode == "off":
-        client.publish("hallway/heater/setmode", payload="off", qos=0, retain=False)
-        # client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
-
-    if Tevolve.hallway_mode == "manual":
-        if float(Tevolve.hallway_current_temp) >= float(Tevolve.hallway_set_temp):
-            client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
-        if float(Tevolve.hallway_set_temp) > float(Tevolve.hallway_current_temp):
-            client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
-
-
-    # Setup initial living room heater values
-    if Tevolve.livingroom_mode == "off":
-        client.publish("livingroom/heater/setmode", payload="off", qos=0, retain=False)
-
-    if Tevolve.livingroom_mode == "manual":
-        if float(Tevolve.livingroom_current_temp) >= float(Tevolve.livingroom_set_temp):
-            client.publish("livingroom/heater/idleaction", payload="idle", qos=0, retain=False)
-        if float(Tevolve.livingroom_set_temp) > float(Tevolve.livingroom_current_temp):
-            client.publish("livignroom/heater/idleaction", payload="heating", qos=0, retain=False)
-
-
-    while True:
-
-        if Tevolve.websocket_message != "":
-
-            if "/api/v2" in Tevolve.websocket_message:
-
-                print(Tevolve.websocket_message[30:-1])
-                m = json.loads(Tevolve.websocket_message[30:-1])
-                # print(m)
-
-                if m["path"] == "/htr/3/status":
-
-                    Tevolve.hallway_active = m["body"]["active"]
-                    Tevolve.hallway_mode = m["body"]["mode"]
-                    Tevolve.hallway_set_temp = m["body"]["stemp"]
-                    Tevolve.hallway_current_temp = m["body"]["mtemp"]
+    # Update Device States
 
 
 
-                    if Tevolve.hallway_mode == "off":
-                        client.publish("hallway/heater/setmode", payload="off", qos=0, retain=False)
-                        # client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
-
-                    if Tevolve.hallway_mode == "manual":
-
-                        if float(Tevolve.hallway_set_temp) > float(Tevolve.hallway_current_temp):
-                            client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
-                            client.publish("hallway/heater/currentmode", payload="heat", qos=0, retain=False)
-
-                        if float(Tevolve.hallway_set_temp) <= float(Tevolve.hallway_current_temp):
-                            client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
-                            client.publish("hallway/heater/currentmode", payload="heat", qos=0, retain=False)
-
-                        client.publish("hallway/heater/currentsettemp", payload=m["body"]["stemp"], qos=0, retain=False)
-                    # Publish hallway current temperature
-                    client.publish("hallway/heater/currenttemp", payload=m["body"]["mtemp"], qos=0, retain=False)
 
 
-
-                if m["path"] == "/htr/2/status":
-
-                    Tevolve.livingroom_active = m["body"]["active"]
-                    Tevolve.livingroom_mode = m["body"]["mode"]
-                    Tevolve.livingroom_set_temp = m["body"]["stemp"]
-                    Tevolve.livingroom_current_temp = m["body"]["mtemp"]
-
-                    if Tevolve.livingroom_mode == "off":
-                        client.publish("livingroom/heater/setmode", payload="off", qos=0, retain=False)
-
-                    if Tevolve.livingroom_mode == "manual":
-                        if float(Tevolve.livingroom_set_temp) > float(Tevolve.livingroom_current_temp):
-                            client.publish("livingroom/heater/idleaction", payload="heating", qos=0, retain=False)
-                            client.publish("livingroom/heater/currentmode", payload="heat", qos=0, retain=False)
-
-                        if float(Tevolve.livingroom_set_temp) <= float(Tevolve.livingroom_current_temp):
-                            client.publish("livingroom/heater/idleaction", payload="idle", qos=0, retain=False)
-                            client.publish("livingroom/heater/currentmode", payload="heat", qos=0, retain=False)
-
-                        client.publish("livingroom/heater/currentsettemp", payload=m["body"]["stemp"], qos=0, retain=False)
-                        # Publish hallway current temperature
-                    client.publish("livingroom/heater/currenttemp", payload=m["body"]["mtemp"], qos=0, retain=False)
-
-            Tevolve.websocket_message = ""
-
-        time.sleep(1)
-
+    tevolve.get_sid()
+    # test.post_websocket()
+    # test.create_websocket()

src/main_old.py

@@ -0,0 +1,238 @@
+import time
+from pytevolve import Tevolve
+import paho.mqtt.client as mqtt
+import threading
+import json
+
+broker_address = "192.168.0.100"
+
+
+def on_disconnect(client, userdata, rc):
+
+    client.connect(broker_address)
+
+
+def on_connect(client, userdata, flags, rc):
+
+    try:
+
+        # client.username_pw_set("admin", "bK2F2ZPjyyngmsN6R32s")
+        #       client.username_pw_set(username="admin", password ="bK2F2ZPjyyngmsN6R32s")
+        client.connect(broker_address)
+    except:
+
+        time.sleep(10)
+
+        client.connect(client)
+
+
+def on_message(client, userdata, message):
+    new_topic = str(message.topic)
+
+    if new_topic == "hallway/heater/settemp":
+        tevolve.set_temperature("3", str(message.payload.decode("utf-8")))
+        # Assume set temp success (Prevent debounce)
+        client.publish("hallway/heater/currentsettemp", payload=str(message.payload.decode("utf-8")), qos=0, retain=False)
+
+    if new_topic == "hallway/heater/setmode":
+        if str(message.payload.decode("utf-8")) == "heat":
+            mode = "manual"
+            # client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
+            client.publish("hallway/heater/currentmode", payload="heat", qos=0, retain=False)
+        else:
+            mode = "off"
+            client.publish("hallway/heater/currentmode", payload="off", qos=0, retain=False)
+            client.publish("hallway/heater/idleaction", payload="off", qos=0, retain=False)
+
+
+
+        if mode == "manual":
+            if float(Tevolve.hallway_current_temp) > float(Tevolve.hallway_set_temp):
+                client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
+            else:
+                client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
+
+
+        Tevolve.setmode = mode
+        tevolve.set_mode("3")
+
+
+    if new_topic == "livingroom/heater/settemp":
+       tevolve.set_temperature("2", str(message.payload.decode("utf-8")))
+       # Assume set temp success (Prevent debounce)
+       client.publish("livingroom/heater/currentsettemp", payload=str(message.payload.decode("utf-8")), qos=0,
+                      retain=False)
+
+    if new_topic == "livingroom/heater/setmode":
+        # print(str(message.payload.decode("utf-8")))
+
+        if str(message.payload.decode("utf-8")) == "heat":
+            mode = "manual"
+            client.publish("livingroom/heater/idleaction", payload="heating", qos=0, retain=False)
+            client.publish("livingroom/heater/currentmode", payload="heat", qos=0, retain=False)
+        else:
+            mode = "off"
+            client.publish("livingroom/heater/currentmode", payload="off", qos=0, retain=False)
+            client.publish("livingroom/heater/idleaction", payload="off", qos=0, retain=False)
+
+
+        if mode == "manual":
+            if float(Tevolve.livingroom_current_temp) > float(Tevolve.livingroom_set_temp):
+                client.publish("livingroom/heater/idleaction", payload="idle", qos=0, retain=False)
+            else:
+                client.publish("livingroom/heater/idleaction", payload="heating", qos=0, retain=False)
+
+        Tevolve.setmode = mode
+        tevolve.set_mode("2")
+
+
+
+
+if __name__ == '__main__':
+
+    tevolve = Tevolve()
+
+    tevolve.post_websocket()
+    time.sleep(1)
+
+
+    t = threading.Thread(target=tevolve.create_websocket, daemon=True, args=())
+    t.start()
+
+    client = mqtt.Client("ryan-heating")
+
+    #   client.username_pw_set("admin", "bK2F2ZPjyyngmsN6R32s")
+
+    client.connect(broker_address)
+    client.on_message = on_message
+    client.on_disconnect = on_disconnect
+    client.loop_start()
+
+
+    client.subscribe("hallway/heater/settemp")
+    client.subscribe("hallway/heater/setmode")
+
+    client.subscribe("livingroom/heater/settemp")
+    client.subscribe("livingroom/heater/setmode")
+
+
+
+    livingroom_status = tevolve.get_status("2")
+    hallway_status = tevolve.get_status("3")
+
+
+    Tevolve.hallway_active = hallway_status["active"]
+    Tevolve.hallway_mode = hallway_status["mode"]
+    Tevolve.hallway_set_temp = hallway_status["stemp"]
+    Tevolve.hallway_current_temp = hallway_status["mtemp"]
+
+
+    # Tevolve.livingroom_active = livingroom_status["active"]
+    # Tevolve.livingroom_mode = livingroom_status["mode"]
+    # Tevolve.livingroom_set_temp = livingroom_status["stemp"]
+    # Tevolve.livingroom_current_temp = livingroom_status["mtemp"]
+
+
+    if Tevolve.livingroom_mode == "manual":
+        Tevolve.livingroom_mode = "heat"
+    if Tevolve.hallway_mode == "manual":
+        Tevolve.hallway_mode = "heat"
+
+    client.publish("hallway/heater/currenttemp", payload=Tevolve.hallway_current_temp, qos=0, retain=False)
+    client.publish("livingroom/heater/currenttemp", payload=Tevolve.livingroom_current_temp, qos=0, retain=False)
+
+    client.publish("hallway/heater/currentmode", payload=Tevolve.hallway_mode, qos=0, retain=False)
+    client.publish("livingroom/heater/currentmode", payload=Tevolve.livingroom_mode, qos=0, retain=False)
+
+    client.publish("hallway/heater/currentsettemp", payload=Tevolve.hallway_set_temp, qos=0, retain=False)
+    client.publish("livingroom/heater/currentsettemp", payload=Tevolve.livingroom_set_temp, qos=0, retain=False)
+
+    # Setup initial hallway heater values
+    if Tevolve.hallway_mode == "off":
+        client.publish("hallway/heater/setmode", payload="off", qos=0, retain=False)
+        # client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
+
+    if Tevolve.hallway_mode == "manual":
+        if float(Tevolve.hallway_current_temp) >= float(Tevolve.hallway_set_temp):
+            client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
+        if float(Tevolve.hallway_set_temp) > float(Tevolve.hallway_current_temp):
+            client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
+
+
+    # Setup initial living room heater values
+    if Tevolve.livingroom_mode == "off":
+        client.publish("livingroom/heater/setmode", payload="off", qos=0, retain=False)
+
+    if Tevolve.livingroom_mode == "manual":
+        if float(Tevolve.livingroom_current_temp) >= float(Tevolve.livingroom_set_temp):
+            client.publish("livingroom/heater/idleaction", payload="idle", qos=0, retain=False)
+        if float(Tevolve.livingroom_set_temp) > float(Tevolve.livingroom_current_temp):
+            client.publish("livignroom/heater/idleaction", payload="heating", qos=0, retain=False)
+
+
+    while True:
+
+        if Tevolve.websocket_message != "":
+
+            if "/api/v2" in Tevolve.websocket_message:
+
+                print(Tevolve.websocket_message[30:-1])
+                m = json.loads(Tevolve.websocket_message[30:-1])
+                # print(m)
+
+                if m["path"] == "/htr/3/status":
+
+                    Tevolve.hallway_active = m["body"]["active"]
+                    Tevolve.hallway_mode = m["body"]["mode"]
+                    Tevolve.hallway_set_temp = m["body"]["stemp"]
+                    Tevolve.hallway_current_temp = m["body"]["mtemp"]
+
+
+
+                    if Tevolve.hallway_mode == "off":
+                        client.publish("hallway/heater/setmode", payload="off", qos=0, retain=False)
+                        # client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
+
+                    if Tevolve.hallway_mode == "manual":
+
+                        if float(Tevolve.hallway_set_temp) > float(Tevolve.hallway_current_temp):
+                            client.publish("hallway/heater/idleaction", payload="heating", qos=0, retain=False)
+                            client.publish("hallway/heater/currentmode", payload="heat", qos=0, retain=False)
+
+                        if float(Tevolve.hallway_set_temp) <= float(Tevolve.hallway_current_temp):
+                            client.publish("hallway/heater/idleaction", payload="idle", qos=0, retain=False)
+                            client.publish("hallway/heater/currentmode", payload="heat", qos=0, retain=False)
+
+                        client.publish("hallway/heater/currentsettemp", payload=m["body"]["stemp"], qos=0, retain=False)
+                    # Publish hallway current temperature
+                    client.publish("hallway/heater/currenttemp", payload=m["body"]["mtemp"], qos=0, retain=False)
+
+
+
+                if m["path"] == "/htr/2/status":
+
+                    Tevolve.livingroom_active = m["body"]["active"]
+                    Tevolve.livingroom_mode = m["body"]["mode"]
+                    Tevolve.livingroom_set_temp = m["body"]["stemp"]
+                    Tevolve.livingroom_current_temp = m["body"]["mtemp"]
+
+                    if Tevolve.livingroom_mode == "off":
+                        client.publish("livingroom/heater/setmode", payload="off", qos=0, retain=False)
+
+                    if Tevolve.livingroom_mode == "manual":
+                        if float(Tevolve.livingroom_set_temp) > float(Tevolve.livingroom_current_temp):
+                            client.publish("livingroom/heater/idleaction", payload="heating", qos=0, retain=False)
+                            client.publish("livingroom/heater/currentmode", payload="heat", qos=0, retain=False)
+
+                        if float(Tevolve.livingroom_set_temp) <= float(Tevolve.livingroom_current_temp):
+                            client.publish("livingroom/heater/idleaction", payload="idle", qos=0, retain=False)
+                            client.publish("livingroom/heater/currentmode", payload="heat", qos=0, retain=False)
+
+                        client.publish("livingroom/heater/currentsettemp", payload=m["body"]["stemp"], qos=0, retain=False)
+                        # Publish hallway current temperature
+                    client.publish("livingroom/heater/currenttemp", payload=m["body"]["mtemp"], qos=0, retain=False)
+
+            Tevolve.websocket_message = ""
+
+        time.sleep(1)
+

src/mqtt_manager.py

@@ -0,0 +1,132 @@
+import json
+from pathlib import Path
+import paho.mqtt.client as mqtt
+import threading
+
+class MqttManager:
+    def __init__(self):
+        self.host = "192.168.0.100"
+        self.username = "connorroy"
+        self.password = "arkreactor7"
+        self.is_connected = False
+        self.object_ids = None
+
+        self.client = mqtt.Client(mqtt.CallbackAPIVersion.VERSION2)
+        self.client.on_connect = self.on_connect
+        self.client.ondisconnect = self.on_disconnect
+        self.client.on_message = self.on_message
+
+        self.client.username_pw_set(username=self.username, password=self.password)
+
+        self.client.connect(self.host, 1883, 60)
+        threading.Thread(target=self.client.loop_forever).start()
+        # self.client.loop_forever()
+
+
+
+    def publish_heaters(self, rad_data):
+        # self.object_ids = heaters
+
+        discovery_topic = "homeassistant/climate/"
+
+        json_payload = self._load_json()
+
+
+        for device_index, device in enumerate(self.object_ids["nodes"]):
+
+            self.client.subscribe(topic=json_payload[device_index]["state_topic"])
+
+            if device["lost"] is True:
+
+
+                self.client.publish(topic=json_payload[device_index]["availability_topic"], qos=0, retain=False,
+                                    payload="offline")
+            else:
+                self.client.publish(topic=json_payload[device_index]["availability_topic"], qos=0, retain=False,
+                                    payload="online")
+                self.client.subscribe(topic=json_payload[device_index]["mode_state_topic"])
+
+
+                if rad_data[device_index][device["name"]]["mode"] == "manual":
+                    mode = "heat"
+                else:
+                    mode = "off"
+
+
+
+
+                self.client.publish(topic=json_payload[device_index]["mode_state_topic"], qos=0, retain=False,
+                                    payload=mode)
+                self.client.publish(topic=json_payload[device_index]["action_topic"], qos=0, retain=False,
+                                    payload="heating")
+
+
+                # self.client.subscribe(topic=json_payload[device_index]["current_temperature_topic"])
+
+                self.client.publish(topic=json_payload[device_index]["current_temperature_topic"], qos=0, retain=False,
+                                    payload="17")
+
+
+
+    def on_connect(self, client, userdata, flags, reason_code, properties):
+
+        print("Connected")
+        self.is_connected = True
+
+
+
+        # # Subscribing in on_connect() means that if we lose the connection and
+        # # reconnect then subscriptions will be renewed.
+        # client.subscribe("$SYS/#")
+
+    def on_disconnect(self, client, userdata, flags, reason):
+        print("Disconnected")
+        self.is_connected = False
+
+
+    def on_message(self, client, userdata, msg):
+        print(msg.topic + " " + str(msg.payload))
+
+
+
+    "Adds devices via mqtt discovery"
+    def publish_discovery(self, heaters):
+
+        self.object_ids = heaters
+
+        path = Path(__file__).parent
+        with open(str(path) + "/device.json") as j:
+            data = json.load(j)
+
+        climate_json = self._load_json()
+        for index, i in enumerate(self.object_ids["nodes"]):
+
+            climate_json[index]["uniq_id"] = i["uid"]
+            discovery_topic = "homeassistant/climate/" + i["uid"] + "/config"
+
+
+            self.client.publish(topic=discovery_topic, payload=json.dumps(climate_json[index]), qos=0, retain=False)
+
+    def _load_json(self):
+        path = Path(__file__).parent
+        json_list = []
+        with open(str(path) + "/climate.json") as j:
+            data = json.load(j)
+
+            for dev in self.object_ids["nodes"]:
+                new_data = data.copy()
+                for i in new_data:
+                    if "{name}" in str(new_data.get(i)):
+                        new_data[i] = new_data[i].replace("{name}", dev["name"])
+                    elif "{uid}" in str(new_data.get(i)):
+                        new_data[i] = new_data[i].replace("{uid}", dev["uid"])
+                json_list.append(new_data)
+            return json_list
+
+# test = MqttManager()
+
+
+# Blocking call that processes network traffic, dispatches callbacks and
+# handles reconnecting.
+# Other loop*() functions are available that give a threaded interface and a
+# manual interface.

src/pytevolve.py

@@ -23,6 +23,7 @@ class Tevolve:
         self.token_primary = ""
         self.token_refresh = ""
         self.sid = ""
+        self.devices = []
 
     setmode = ""
     setTemperature = ""
@@ -90,8 +91,6 @@ class Tevolve:
 
             x = requests.post(url, headers=headers, data=data)
 
-            print(x)
-
             if x.status_code == 200:
                 Tevolve.token = x.json()["access_token"]
             else:
@@ -111,6 +110,26 @@ class Tevolve:
             # Tevolve.token_manager()
 
 
+    def get_devices(self):
+        try:
+            endpoint = "/devs/"+self.dev_id+"/mgr/nodes"
+
+            header = {'content-type': 'application/json',
+                      "Authorization": "Bearer " + self.token_primary}
+
+            url = str(self.api_url + endpoint)
+            devices_request = requests.get(str(self.api_url + endpoint), headers=header).json()
+
+            self.devices = devices_request
+
+        except:
+            raise
+
+
+
+
+
+
     def post_websocket(self):
 
         # Tevolve.token_manager()
@@ -209,30 +228,8 @@ class Tevolve:
         if response.status_code == 201 or response.status_code == 200:
             pass
 
-    @staticmethod
-    def get_mode(heater_id):
-        headers = {
-            'host': 'api-tevolve.termoweb.net',
-            'origin': 'https://tevolve.termoweb.net',
-            'content-type': 'application/json',
-            'accept': 'application/json, text/plain, */*',
-            'user-agent': 'Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) '
-                          'Version/15.4 Safari/605.1.15',
-            'authorization': 'Bearer ' + Tevolve.token,
-            'referer': 'https://tevolve.termoweb.net/',
-
-        }
-        url = "https://api-tevolve.termoweb.net/api/v2/devs/082e858131ff012c51/htr/" + heater_id + "/status"
-
-        response = requests.get(url, headers=headers)
-        if response.status_code == 201 or response.status_code == 200:
-            mode = response.json()["mode"]
-            if mode == "manual":
-                return "heat"
-
-
-    def get_status(heater_id, self):
 
+    def get_mode(self):
         headers = {
             'host': 'api-tevolve.termoweb.net',
             'origin': 'https://tevolve.termoweb.net',
@@ -244,11 +241,38 @@ class Tevolve:
             'referer': 'https://tevolve.termoweb.net/',
 
         }
-        url = "https://api-tevolve.termoweb.net/api/v2/devs/082e858131ff012c51/htr/" + heater_id + "/status"
+        url = "https://api-tevolve.termoweb.net/api/v2/devs/082e858131ff012c51/htr/" + self.heater_id + "/status"
 
         response = requests.get(url, headers=headers)
         if response.status_code == 201 or response.status_code == 200:
-            return response.json()
+            mode = response.json()["mode"]
+            if mode == "manual":
+                return "heat"
+
+
+    def get_status(self):
+        result = []
+        try:
+            for index ,i in enumerate(self.devices["nodes"]):
+                headers = {
+                    'host': 'api-tevolve.termoweb.net',
+                    'origin': 'https://tevolve.termoweb.net',
+                    'content-type': 'application/json',
+                    'accept': 'application/json, text/plain, */*',
+                    'user-agent': 'Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/605.1.15 (KHTML, like Gecko) '
+                                  'Version/15.4 Safari/605.1.15',
+                    'authorization': 'Bearer ' + self.token_primary,
+                    'referer': 'https://tevolve.termoweb.net/',
+
+                }
+                url = "https://api-tevolve.termoweb.net/api/v2/devs/"+self.dev_id+"/htr/"+str(i["addr"])+"/status"
+
+                response = requests.get(url, headers=headers)
+                if response.status_code == 201 or response.status_code == 200:
+                    result.append({i["name"]: response.json()})
+        except Exception as e:
+            raise e
+        return result
 
     @staticmethod
     def set_temperature(heater_id, set_temperature):
@@ -281,10 +305,21 @@ if __name__ == '__main__':
     test = Tevolve()
     test.get_token()
     test.get_dev()
+
+    test.get_devices()
+
+
+    for device in test.devices["nodes"]:
+        if device["name"] == "Hallway":
+            test.get_status(device["addr"])
+
     test.get_sid()
+
+
     test.post_websocket()
     test.create_websocket()
 
+
     while 1:
         if test.websocket_message != "":
             print(test.websocket_message)